Məhsullar

Bells catching

Bells catching

Bells catching КС 


Main sizes: KC-54, KC-69, KC-85, KC-100, KC-115, KC-125, KC-132, KC-150, KC-160, KC-180
The bells of the through КС are designed for capturing by screwing on the outer surface of the couplings, locks or landing (in this case, the broken or broken upper part of the pipe is passed through the bell) and then extracting drill, compressor or casing strings during fishing operations in oil, gas and exploration wells.
The bell is a branch pipe, in the upper part of which there is a connecting thread, and in the lower part there is an internal fishing thread with a taper of 1: 16.
The bells of the through КС are made of forged alloy steel. Depending on the application conditions, the bells may have different designs.

Bells К, ЛК


Main sizes: K 42-25, K 50-34, K 58-40, K 70-52, K 85-64, K 100-78, K 110-91, K 125-103, K 135-113, K 150-128, K 174-143
LK and K type bells are designed for grabbing and subsequent extraction of the remaining drill or compressor pipe columns in the well by screwing them into their outer surface. The total installed resource for the number of cuts is 2 times.. Designed to work in all macroclimatic areas according to GOST 16350-80. TU 26-16-284-90.
The bell LC, K is a branch pipe, in the upper part of which the connecting thread is made, in the lower part-an internal fishing thread with a taper of 1: 16.
LK and K bells are made of forged alloy steel. Depending on the application conditions, the bells may have different designs.

Bells ЛКГ




Bell LKG is designed to capture and extract clutches, locks or other items having a cylindrical section in the upper part. Capture is made by pressing on the outer surface.
Bell LCG is a branch pipe, in the upper part of which the connecting thread is made, in the lower part there is a conical fishing surface with a taper of 1: 64.
Smooth LKG fishing bells are manufactured without heat treatment (mandatory requirements).

Bells ЛКН-122 

Fishing bell fishing LKN-122 is designed for capturing by screwing on the outer surface and then extracting cylindrical elements of columns during fishing operations in oil, gas and exploration wells.
Fishing bell set LKN-122 consists of a translator, funnel and insert
. The moment from the translator to the insert is transmitted through the slots on the end of the translator and insert
. Inserts can be made with different diameters of the fishing thread, which expands the range of application of the bell.